The spur gear box is also called an eccentric shaft gear box. Its diameter is generally 37MM. Its bearings are supported by oil-containing bearings. Under the same conditions, it has a long service life and a particularly low noise. There are many applications for variable speeds in industrial machinery. A large gear is installed on the low-speed shaft and a small gear is installed on the high-speed shaft in the spur gear box. The process of acceleration or deceleration can be completed through the gear meshing and transmission.
The rotating shaft drives the sector gear in the gear box to rotate and transmit the force vertically to another rotating shaft. That is, a large gear drives a small gear or a small gear with a large gear. The gear box is a complete set of products for various cold bending equipment. It is mainly used to change the transmission direction and torque. It can also be used as a driving device for other mechanical rotation requirements. Zh
1. Acceleration and deceleration are often referred to as variable-speed gearboxes.
2. Change the transmission direction. For example, we can use two sector gears to transfer the force vertically to another rotating shaft.
3. Change the rotation torque. Under the same power condition, the faster the gear rotates, the smaller the torque the shaft receives, and vice versa.
4. Clutch function: We can separate the engine from the load by separating two gears that originally meshed, such as the brake clutch. 5. Distributing power. For example, we can use one engine to drive multiple slave shafts through the main shaft of the gear box, so as to achieve the function of one engine driving multiple loads.
